- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
The Tube and Pipe Journal July/August 2006
The Tube and Pipe Journal became the first magazine dedicated to serving the metal tube and pipe industry in 1990. Today, it remains the only North American publication devoted to this industry, and it has become the most trusted source of information for tube and pipe professionals.
Dam the purge gas and full speed ahead
- By Jennifer Simpson
- Jul 11, 2006
- Consumables
- Article
Shielding gas is an often overlooked area of savings in tube and pipe welding. Creating a purge dam in one of several different ways can help you isolate the weld area and minimize the amount of gas and time needed to purge the weld zone properly.
Electromagnetic test methods for welded carbon steel tubing
- By A.C. Richardson
- Jul 11, 2006
- Testing and Measuring
- Article
Although eddy-current testing is king in the tube production industry, flux leakage is worth a look. Using a small test sample, equipment-maker InspecTech found that for 3.50-in. to 4.00-in. carbon steel tubing with wall thickness from 0.056 in. to 0.100 in., the flux leakage method found more defects and turned out fewer false alarms than the eddy-current method did.
Introducing cold pilger mill technology
- By Oliver Strehlau
- Jul 11, 2006
- Tube and Pipe Production
- Article
The cold mill pilgering process uses ring dies and a tapered mandrel to reduce tube cross sections by up to 90 percent. Because the process relies on large number of small forming steps, the result is tube or pipe that has nearly homogenous material characteristics. It is suitable for every metal.
Angling for a good cut
- By Al Terronez
- Jul 11, 2006
- Sawing
- Article
Good sawing and maintenance practices can help alleviate problems that can occur when making angle cuts in structurals and tubing. Addressing the stock, machine setup, the blade, the cutting fluid, and the saw itself may not completely rid fabricators of problems, but it can help keep the operation profitable and relatively painless.
How do you measure success?
- By W.B. "Bud" Graham
- Jul 11, 2006
- Tube and Pipe Production
- Article
Contrary to common opinion, a high production rate is not the key to success in making tube. Attempting to low-ball the price — while cutting corners in maintenance and upgrades -- is a poor strategy in this industry. Columnist Bud Graham provides four production scenarios that compare various rates of capacity utilization and line speed and how these affect profitability.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 05/14/2024
- Running Time:
- 62:12
Cameron Adams of Laser Precision, a contract metal fabricator in the Chicago area, joins the podcast to talk...
- Trending Articles
Making the move from hard automation to robotic welding
Students learn fabrication one piece at a time
Miscellaneous metals fabricator increases productivity and opportunity with plasma cutting
Get a grip on the misunderstood tube bender motor starter
Manufacturing finally sees some sunshine
- Industry Events
Laser Welding Certificate Course
- May 7 - August 6, 2024
- Farmington Hills, IL
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,
- Upcoming Webcasts
Managing Dangerous Dusts from Metalworking
- June 26, 2024
- Sponsored
- Presented By: Camfil Air Pollution Control