- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Consumables Corner: Changing over to metal-cored wire in SAW
- By Michael Ostaffe
- August 27, 2014
- Article
- Consumables
Q: One of my vendors recently approached me about replacing the solid wire in my submerged arc welding (SAW) application with a metal-cored wire. Should I consider making the change?
A: Depending on your application, you should certainly consider making the change. Metal-cored wires can provide substantial benefits in SAW, including welding structural steels, pipes, boil and pressure vessels, ship plates, cast steels, and fine-grained steels on carbon and certain low-alloy steels.
Several classifications of metal-cored wires have been developed that can be substituted anywhere a corresponding solid wire is used (for example, EM12KS metal-cored wire for EM12K solid wire).
With a solid wire, the welding current is carried by the entire cross section of the wire, and the resulting molten droplets are large. Metal-cored wire produces finer droplets and a less turbulent weld pool because the current is concentrated on the outside sheath of the tubular wire. Because of the spray transfer pattern, metal-cored wire can bridge gaps and help eliminate cold lap. It is ideal when fit-up is less than optimal. In addition, because of its broader penetration profile, metal-cored wire can weld thin materials with less chance of burn-through.
Perhaps the best reason to use metal-cored wire with the SAW process is the high deposition rate. With the same flux, welding current, and electrical stick-out, metal-cored wire can allow you to either reduce the number of passes or increase your travel speed. Depending on thickness, speed increases of 10 percent to 15 percent are not uncommon.>/p>
Finally, there is a cost difference between using metal-cored and solid wires. It is important to distinguish between product price and total cost. The product price is what you pay upfront, typically in dollars per pound of wire. The total cost is the overall expense of using the product, typically in dollars per pound of deposited weld metal. Total cost takes into account the price of the wire and all other welding costs, such as flux and labor.
Labor accounts for up to 85 percent of the cost of a weld. Because of its higher deposition rates, metal-cored wire can provide labor cost savings that more than offset the higher price of the wire. So while the price of metal-cored wires is typically higher than solid wire, your total cost may actually be lower. As a rule of thumb, you will have the greatest chance of seeing a total cost reduction with metal-cored SAW wires if you are welding on thin steel at high speeds.
About the Author
Michael Ostaffe
ESAB Welding & Cutting Products
Filler Metal Manufacturing Center, 801 Wilson Ave. P.O. Box 517
Hanover, PA 17331
About the Publication
Related Companies
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/30/2024
- Running Time:
- 53:00
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
- Trending Articles
Aluminum MIG wires offer smooth feeding, reduced tangling
The role of flux in submerged arc welding performance
Three ESAB welding machines win Red Dot Awards for product design
Power source added to cobot welding system for simplified automation
Connecticut students compete in Maritime Welding Competition
- Industry Events
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,