- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Consumables Corner: Advancements in SAW
- By Michael Ostaffe
- August 29, 2014
- Article
- Consumables
Q: What role does flux and wire play in submerged arc welding?
A: It is important to choose the right flux and wire combination for submerged arc welding (SAW) processes. This will allow you to gain efficiency while meeting your performance requirements.
Basic submerged arc welding uses a single wire and a DC power source. Twin-wire SAW uses two smaller-diameter wires with a single power source and feeder, which can increase deposition rates by 20 percent or more without significantly increasing heat input. It does this by pushing the current through the smaller cross-section area of wire to achieve greater current density.
SAW with negative-polarity DC can increase deposition rates by 20 percent to 30 percent; however, it risks shallow penetration and lack of fusion. Welding with AC provides a better deposition than positive-polarity DC and better penetration than negative-polarity DC. Square-wave AC output provides a more stable arc than conventional sine-wave AC.
Tandem SAW uses two wires that feed into the same molten puddle. Each wire has its own power source and feeder, doubling the deposition rate of single-wire SAW. It is possible to combine tandem welding with twin wires using a combination of DC positive/AC or AC/AC. Using 1,250-amp square-wave power supplied with tandem twin-wire SAW will provide the highest possible deposition rates.
All these processes seek to increase weld travel speed while decreasing the number of passes needed to complete a weld. High travel speed requires high amperage, while decreasing the number of passes requires greater heat input per pass. This puts high demand on the flux and wire. If the flux breaks down under high current, the weld can become ropy and slag inclusions may occur. At high heat input the mechanical properties of the base metal HAZ and weld metal can decrease. The best flux choice is one that is designed for welding at these high heats and travel speeds and offers easy slag removal and low bead profile. These fluxes are currently used in wind tower, pipe mill, and other welding-intensive industries.
About the Author
Michael Ostaffe
ESAB Welding & Cutting Products
Filler Metal Manufacturing Center, 801 Wilson Ave. P.O. Box 517
Hanover, PA 17331
About the Publication
Related Companies
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/30/2024
- Running Time:
- 53:00
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
- Trending Articles
Aluminum MIG wires offer smooth feeding, reduced tangling
The role of flux in submerged arc welding performance
Three ESAB welding machines win Red Dot Awards for product design
Power source added to cobot welding system for simplified automation
Connecticut students compete in Maritime Welding Competition
- Industry Events
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,